How to engrave gold with a fiber laser
Fiber Laser Engraving Parameters for gold engraving.
This are the best settings for gold engraving with a fiber laser engraving machine BCF, Raycus, JPT or others.
Speed
1500
Power
45%
Frequency
37
HATCH: Bidirectional
HATCH angle: 0
LINE SPACE: 0.5
Note: These engraving parameters are for reference, and the results may change deepening on the lens, power laser source brand, metal mixture, ETC.
We have try with
These parameters have been tried with a fiber laser BCF 20W with a 10x10cm Opex lens. Also, These parameters can be applied to Raycus and JPT.
Software used
We have used EZcad 2. But these parameters also apply to EZcad 3 and, in general, any laser control card from JCZ.
Variations
Speed and frequency can remain the same, but you may change the power percent if you own a laser with more power or less power.
You can engrave relatively faster and deeper if you own a 30W, 50W, or 100W laser from other brands or us.
