How to engrave Light colour on aluminium with a MOPA fiber laser
MOPA Fiber Laser Engraving Parameters for engraving light color on Aluminium.
These are the best settings for engraving light color over aluminium with a fiber laser engraving machine BCF, Raycus, JPT or others.
Speed
2000
Power
80
Frequency
265
Pulse: 10 or 0
HATCH : 1
HATCH type: Bidirectional
ANGLE: 0
LINE SPACE: 0.5
Note: These engraving parameters are for reference, and the results may change deepening on the lens, power laser source brand, metal mixture, ETC.
In our BCF 30W MOPA, these parameters can engrave light colour with a 10x10cm lens. The result is smooth and does not take coat out.
We have tried with
These parameters have been tried with a fiber laser BCF 30W MOPA with a 10x10cm Opex lens.
Software used
We have used EZcad 2. But these parameters also apply to EZcad 3 and, in general, any laser control card from JCZ.
Variations
Speed, frequency, hatch, and line space, can remain the same, but you may change the power percent if you own a laser with more power or less power.
All this information does not represent the engraving time. The time varies depending on the design or pattern to engrave.
